With the cooler mounted on the rearmost fitting I was able to experiment with the rubber matting that my friend dropped off, he owns a rubber factory and they make the masks for fighter pilots and the thrust ssc record attempt.

The rubber bolts to the cooler air scoop with one bolt and is then glued and riveted to the bumper so the bumper can still be removed easily. This now means air cannot pass around the cooler and must go through.


I will add some hook and loop so it seals in a straight line down the weld.




I will contact glue the rubber from<br/>Behind to form a tight seal on the bumper




This tab bolts on to the air Tec scoop and has now been trimmed to the exact shape.