After the winter it was time to do something to the Cosworth again. It was already 5 years that the timing belt was changed, so I again put a new one on. At the same time I did an oil and oil filter change.
I also have a new temperature sender fitted, which was very kindly supplied by Cossynut2.
The one I put in last year gave a too high temperature reading.
I also fitted a new MSD fan loom. Before I removed the old wiring I first tested it. It turned out one fan wasn't even running and after switching if on/off a few times the other also stopped working.
But with the new loom both are working perfectly again.
And lastly I fitted a 21 mm arb from a Scorpio 24v to the rear instead of the standard 18 mm one, making it about 85% stiffer. I also replaced the droplinks with rose jointed ones to make it even more stiff.
And fitted.
