Thats correct it'll fit with ease for a 90 spec bumper. Expect to fit bonnet pins if you find the catch 'catches' the intercooler, either way its a tight fit between the bonnet and the intercooler.

You can chop the catch if you want though.

Also the fans should be free from the rear of the intercooler otherwise you'll grind a hole into it.

Did you move the radiator back. make sure you have at least 10mm/1cm gap between the turbo(actuator bracket I think) and the radiator. When you fit the Intercooler ensure its fit as far to the left as possible(drivers side for you). Providing you have a good fitment you'll keep the front looking standard.