View Single Post
Old 13-04-2016, 10:30 PM
  #23  
Jules44
Part of the Furniture
 
Jules44's Avatar
 
Join Date: Oct 2015
Location: Leicester
Posts: 184
Received 7 Likes on 7 Posts
Default

Bit of an update.

Front brakes have been rebuilt with new seals pistons and new pads.
Rear Brakes new pads fitted.
Front Koni shocks rebuilt by SP Suspension and fitted.
Front springs replaced with Ahmed Bayjoo springs.
Rear Koni shocks tested all good and fitted.
All brake fluid replaced.

Engine.
Timing belt replaced.
Alternator belts replaced
Power steering belt replaced.
Water pump gasket replaced
New 82 degree stat fitted and new gasket fitted.
Air filter removed and refitted airbox with new k&n filter
Oil & oil filter replaced
New Airtec rad fitted
Radiator fan wiring upgraded fitted
New dizzy cap and rotor arm fitted
ICSV cleaned out.
New fuel filter fitted, unable to fit upgraded wiring loom as unable to open doors fully due to storage container.
Hopefully this weekend I will be replacing all fluids and fresh petrol and attempt to start it, fingers crossed.

Any pointers of starting up an engine that has not been started in ten years.