Still having one odd issue, clutch in and clutch is fine, you can change through all gears at any revs and wheels don't turn, take foot off clutch and 50% of time car moves, rest of time it is as if clutch still in.

I put it up on ramps with engine running, you can see the tilton centre push move and push clutch cover but sometimes when you take foot off clutch it doesn't return all the way home.

I am hoping this is just some stuck air, if not then I fear I need to space the bell housing a bit more to move the box back off the clutch.....the joys of a modified skyline box eh? I think that as my bell is 5mm short I think there is not enough tolerance to allow room for the tilton.

The tilton instructions say to give 5mm air gap between piston and clutch cover. It seems to have less than that so will try bleeding some more and then if not spacer some more.