Testing to water and looking to get rid of all the parts below due to taking a break from the cosworth scene...

I have enough parts to almost build 2 engines.

I have one bored and machined block ready to go with pocketed Pistons with new rings, crank and bearings, con rod bolts etc...


2x 205 blocks (1 freshly bored)
2x cranks (1 x std grind and polished)
2x Set of rods
Set of Pistons
Set of pocketed Pistons
2x auxiliary shafts
2wd sump
4x4 sump
4x4 head, Ported 24.5/24.5 (freshly skimmed and guides checked)
2 sets of cams
3 sets of pulleys
T3 turbo
Complete 2wd inlet
Throttle body
Another head, had a lot skimmed off but useable
Set of yellows
3x fuel rails
Distributor
Front cover
Couple inner bottom pulleys
Alternator etc
Modine oil cooler
Cam bearings
Lifting eyes
Alternator
Starter motor
Dipstick
Water pump
Oil pump etc
Other parts included but not pictured

Please contact me on 07969443979 if serious

£2500 the lot