Originally Posted by
Stu @ M Developments
That missfire sounds more like a signal sync problem than ignition related as its global, IE: all 4 pots are missing together which is normally something like crank and phase signal strength problems or their syncronisation.
have you double checked the phase sensor alignment INSIDE the distributor as opposed to that pointless mark on the aux pulley housing?
Hi Stu,
I had a look at the phase sensor yesterday inside the distributor. Both red and blue wires seemed in good condition with no splits etc.
I checked the gap and it was in around 0.2mm.
I got the CPS from yourselves a few months ago so I suspect is working correctly. Is there any way of testing these sensors to see if they are working correctly?