Custom side exit exhaust
Made for my fiesta cosworth but I changed to a smaller twin side exit style
This is not a direct fit/bolt on for any car or cosworth in particular and will need to be fitted and your pipe work made/adapted to suit
Fabricated from 304 stainless
All Tig welded (not purge welded as see no point on tailpipes)
Exhaust opening is approx 14" wide by 2" tall
Pipe section to connect to your system is 2.5" but I could change this to 3" or 3.5" if required free of charge
£240 delivered
Thanks
Marc