can anybody help, I have a 06 mondeo 2l tdci 115 which until recently has been brilliant, then we had an influx of common faults- egr, egr-intercooler pipe, turbo stuck, cat clogged and then injectors! So after some serious diy over several weekends aided by you tube and Mr muscle we sorted the turbo changed egr+pipe cleaned cat the maf and the inlet manifold(the car still starts fine) so now we remove individually and clean injectors, refit, bleed and she doesn't start, the rail isn't building enough pressure(30-40bars) this. The car is now at a back street and even they can't get it going and are now saying it's the pump! Seems highly unlikely as it was working before we carried out work....tend not to take their word, good lads just a bit dim! So any experienced help/advice would be appreciated