thanks guys.. made some progession again last weekend finishing most of the wiring on the car.

Denso coils with some alu spacers made on the lathe



Fitted the coils




Then made a bracket for under the dashboard for all the relays




All labeled up




Some +12v feed from the battery to the relays



Fitted some of the wiring to the other pins on the relays. The main relay is switched by the Original +12v wire coming from the key and when the main relay is switched in switches on the other relays to supply the power to it's components.




Customized the genuine ABS ECU holder to accept the Vipec ECU.. I trialfitted it with the 4wd Vipec ECU unit so don't look at that




All fitted under the dashboard