Originally Posted by
beaver rs 88
Not posted for a while but here goes.... I converted my series 2 to ofab efi last year and had a custom chip made on the rollers at MSD. They said that I should get my beiges cleaned and flow tested as I was running lean after 5k rpm. I had this done and the car is currently running 193bhp on their rollers. I took the car to the ring last summer and to SPA aswell and noticed it was running hot on the track. I am wondering if the injectors are still not upto the job as I'm running 3bar standard fuel pressure but MSD advised I should get bigger injectors rather than upping the fuel pressure and running my injectors flat out. So what injectors can I use now? Tried searching but haven't come up with anything. Sorry for the long post.
cheers nick.
There won't be much info out there if any as beiges are usually the lot on OFAB/OFAC with off the shelf chips. Obviously you'll need a remap so I'd go with the mappers advice, you could use one of many Bosch EV1 injectors.
Lee
