Tried 3 coil packs now, tested the resistance of the Crank and Cam position sensors.


Made a loom to test the voltage during cranking and getting a reading.


Continuity tested every pin on my Omex loom, that's all ok, checked the Ford ECU for the inputs that are spliced. Checked power and earth at ECUs.


There is 2 options for crank sensor wiring and tried it both ways round.
Even removed the rocker cover to check the timing.


Unable to download the diagnostic file off the Omex website.


Could it possibly be a blank ECU? it was bought new with a base turbo map on.