Trying to get the ZT engine running while I'm off over Christmas, Got the keys sorted out for the immobiliser, red LED and the fuel pump priming tells me it ok, fuel is getting to the rail ok.
No spark at plugs when I test them to earth, I have power at the coil pack (middle pin) but don't seem to get anything at the other 2 pins for cyls 1&4 and 2&3.


Self wired to Omex ECU, does anybody have the test procedures for the position sensors that feed the ECU for it to send the signals to the coil pack.
Is there anything else I could test?








Its a blacktop 2.0 in a 2000 Puma