Originally Posted by dojj

that was the hardest part, i needed 2 hands to pull the pipe off, but then another hand to use the clamps

after 4 hours of struggling and swearing my dad wandered past and i got him to hold the clamps

then it was a 5 minute job replacing the housing and then putting the pipes back on again

the bolts are easy to get to with a small ratchet and the wiring plug is also a doddle to remove, it's just that hose clamp as you have to bend the pipe to get it over the lip in the plastic before it'll come off and the same in reverse

if the front slam panel wasn't in the way it would be but a moments work