Originally Posted by
Chas
Has anyone fitted a 2 part Zetec sump to a ZVH/Zetec on a BC5 Gearbox? What mods have to be done for it to fit?
I know ZetecInside reckons a stock sump is fine but a recent trackday seemed to prove the opposite.
Fitted one to a IB5 box which is the same deal.
Cut both the sump wings off, trim away a bit of webbing on the front to allow the starter motor to fit. Then i had to weld some extra plate onto the gearbox sandwich plate (which needed trimming in a few places) as where the starter would be on a zetec was just a big hole to the back of the flywheel.