I managed to get a few little jobs done yesterday, just some small cosmetic bits that have been bugging me for a while but I did also do a job or two that i'd been meaning to for some time as well.

First up I replaced the nasty old bonnet bolts with some much nicer anodised cap head items.

Untitled by Jay Hardy, on Flickr

I also did the same inside for my kill switch.

Untitled by Jay Hardy, on Flickr

The door cars got some love as well.... replaced the nasty looking rivets with some much nicer fasteners, also means I can removed the door card now without have to drill the rivets off every time.

Untitled by Jay Hardy, on Flickr

Untitled by Jay Hardy, on Flickr

Tidied up the wash wipe hose.

Untitled by Jay Hardy, on Flickr

Untitled by Jay Hardy, on Flickr

I also solved my issue of not having any rear fog lights since I cut the bumper in half. I'd bought this MSA spec rain light months ago but only just got round to fitting it. Wired it into the old fog light loom.

Untitled by Jay Hardy, on Flickr

And fitted... Will be treating to some of the same anodised orange bolts to hold it in place as well.... Nice and bright too!

Untitled by Jay Hardy, on Flickr

One of the jobs i've been meaning to do for a long time is sort the threads out on the rocker cover studs, they we're cross threaded and it meant I could tighten the rocker down properly.

Like new..

Untitled by Jay Hardy, on Flickr

I also refurbed the little cup/washers and used some more fancy fasteners!

Untitled by Jay Hardy, on Flickr

Looking much nicer and its properly tightened down as well.. Win!

Untitled by Jay Hardy, on Flickr

That was pretty much it for yesterday, more to come soon!