Done the clutch set up today
Checked the measurements and worked out I needed a spacer of 10.5mm so machined up a new 1 as I did not want to modify my Cossie mt75 one
Then once that was done I had to figure out how to secure the spacer so I utilised the original clutch mount bracket, cut up a bit of billet, drilled it and welded it to the spacer
All worked out perfect and after some careful clamping and welding it sits perfectly over the nose piece with zero tilt as far as I can see
Anyway let the pics show the story
Box ready to be fitted
Will fit the box tomorrow hopefully
Thanks
Marc