Ok guys first ever post here on pf (after 4 years) so here goes!!

So I've decided to run my rusty old blue oval on a 2.0 pinto turbo, I have an engine which consists of 205 block, piston crowns machined, 4x4 oil pump & spray bar, unleaded head, rs turbo t3, custom inlet with yellow Injectors


I have acquired a cosworth engine loom and l6 ecu, Now when it comes to wiring and ecu's I'm pretty much clueless, so would I be right in saying I can use this loom an ecu ??








Also what about a suitable chip to run the level of tune on the engine?? Or will I need a custom map? I'm not sure what chip is in the ecu now maybe stage 2?? Green injectors?? Any ideas?


Any help and advice much appreciated
Rad