I've got a 1992 sapp 4x4 and doing a rear end restoration, I need some new bolts for the rear drive shafts. I'm being told there are two types can anyone tell me which I need?

This is what I'm being asked......

The bolts should be M10 but they may be fine thread which will be 1.25mm
pitch rather than 1.5mm pitch.

It is unlikely but they might be M8 in which case, only one possibility
so they will be correct.

If you don't understand this, get help from someone that does or your going to waste time and money buying the wrong bolts.


Thanks fellas