Originally Posted by
Karl @ FPT
Wossner would be my choice, the Accralites are a little noisey from cold (even with the correct tolerances).
Also make sure where ever you buy them from actually has them in stock before handing over you're hard earned.
If you've not thought about compression ratio yet just worth mentioning that standard is fine unless you're going for 300+BHP or you have a heavily decked block and skimmed head of course.
Im only looking around the 220bhp mark as im still on MFI with a fifth injector and cossie t3 etc.
I broke the ringlands on Number 3 back in October (had standard Mahle cast in), so im doing it more for piece of mind than big power.
My head has had a light skim, port and polish, bigger inlet valves and a kent cam done by AL Developments in Leeds.