Thread: Cambelt Change Issue ; running closer to the edge. Help?
View Single Post
Old Jul 11, 2015 | 01:02 AM
  #5  
Chas's Avatar
Chas
Regular Contributor
 
Joined: Sep 2005
Posts: 295
Likes: 6
From: Warwick
Default
That is partially the issue. Since I have changed the belt it is running closer to the edge of the pulley. However, it has not moved from its new path ; I.E is not running right on the edge. I did the 'twist' test today and it goes pretty much perfectly to 90 degrees .

Here is how it runs after the belt was changed:

Name: B267D98F-ABF6-487E-BF65-B039B29CFF71.jpg Views: 228 Size: 134.4 KB

Name: 9B68C56E-6345-44B4-91C3-483106802407.jpg Views: 266 Size: 120.0 KB
Name: 65681031-0A4B-47EB-9B27-AEB170128DE3.jpg Views: 225 Size: 122.5 KB

Name: 2219C5C0-88D0-4BB8-BA6A-A874AE71A161.jpg Views: 240 Size: 150.1 KB


Engagement of the teeth to the cam pulley:

Name: 0287266E-AE07-43A2-9885-0D11FE1CCCC9.jpg Views: 239 Size: 150.9 KB

Differing tooth design:

Name: 705438C8-C35C-49A5-ACAE-B751FAD61F66.jpg Views: 228 Size: 141.7 KB
Reply
0