Complete set of Powerflex bushes fitted today (inner, outer and roll bar to floor). Had a bit of a problem with the inners. It appeared the aftermarket TCA's supplied by Graham Goode were a bit too wide across the inner end so although the bushes pressed together out of the arm would fit nicely between the crossmember flanges (or whatever they are called) once fitted to the arm there was no way they were going to go in. (the bushes were not meeting in the middle) Had to grind a bit off each side of the inner end of the TCA until they could fit between the crossmember. Feels much better again now with none of the forward /aft movement of the strut. Time will tell if they last better than the other sets I have fitted. Thanks again for the replies above. David