Originally Posted by Scott_Rst

Hello mate,

No I'm not using same set up anymore, that was a few years ago, I'm on a st170 gearbox now,

Not sure on spec of you're engine, but the cp2000-8 is good for around 170 lbsft
of torque,

The cp2000-35 is actually the one i had now that i think about it! which is good for around 230 lbs-ft of torque and I'm sure that'll be the one you want!

But as said in this thread, it is definitely worth while doing the mk5 quadrant/pedal conversion!

cheers
scott