Originally Posted by
Caddyshack
Pretty sure the earlier ones sense current flow off the coil and the later have a wire (white?) off the coil.
With the Cossie looms getting old I would check the earths and then the connectors.
If you go for a Paddle clutch and stronger clutch cover then convert to Hydraulic whilst the box is out. It is not hard to do.
will have a look at the conectors and the coil, and already have an AP 6 paddle clutch fitted.
How are your connectors on the bulkhead in the engine bay, these are usually the primary cause of this, lots of people replace the loom or cut out the plugs and just solder the wires together which will fix it.
As above will have a look at them in the next few days, and give them a clean to see if anything changes, cheers