Right here goes:
The current front set up is
2wd cosworth crossmember, adjustable tca's, 4wd hubs and group a uprights.
I have 6mm spacers on each side so the second hand 6 pot calipers and 330 disks are centered.
Total width front 1.660
Rear - Capri atlas axle with disk brakes = 1.620
Used to have spacers.
Wheels are 16x8 with offset of et25 (25mm diference between the middle of wheel and mounting face).
these wheels come very close to the strut (possibly 4~5mm clearance), but a wheel with 0 offset should be 25 mm more clearance.
The reason I took the spacers off the rear, is i am currently changing spec and fitting 16x9 wheels on the back
Hope this helps, anything more we can help just ask!