Haven't been doing much to the car but had a few weekends on it got the oil cooler and hoses fitted along with the water hoses, coil mounted and wiring repaired , alternator stripper and cleaned and rebuilt , fuel pump and filter mount built up , got an msd fuel regulator and got my mate to tig weld some an fittings onto the fuel rail and he's also welding an fittings onto the tank inlet-outlet so every fuel line will be stainless hose with jic fittings , using the hose crimper at work with stainless ends , hose is -6 feed and return with -8 feed from tank to pump , got an old distributer for a pinto from another mate so stripped that to get the shaft out of it so I can use the shaft as an oil pump primer so when it's fired up I can put some oil pressure through it as the engine was built a few years ago and never fired so don't want it firing up dry, also fitted up the bumpers and grill mostly just because they were getting in the way but they'll need to come off again to get painted , offshore this now so once I'm back im going to get stuck in and get it started up