Originally Posted by
MK MOTORSPORT
hi
angles wont change with wheel base length ,imagin in you took a standard cosworth cut 10 inches out the middle and welded it back to gether the angle of the engine box havent changed
what you suggest is the best way ,just measure the distance from centre of the
output shaft to the floor pan the do the same measurement with skyline
mark
I think we both meant other things, the angle of box and engine wouldn't change but if you shorten the wheelbase the angles of the ujs become more acute as any change in height or deflection becomes tighter the shorter the run. I.e 1 cm out over 1.5 m is much easier for the uj than 1cm over 30 cm.
Surely as long as the faces of the flanges line up to each other on the same horizontal and vertical plane then the props would be level?
I appreciate the help and will do as you say by measuring the centre of the std output for horizontal and vertical location.
