View Single Post
Old Feb 15, 2015 | 08:09 PM
  #1  
Kevwana's Avatar
Kevwana
Virgin
 
Joined: Feb 2015
Posts: 3
Likes: 0
From: Central Scotland
Default XR3i Wiring - Help pls..

Hi, new to forum, (Ford Ranger / Transit Ex RAC SWB/ Offroader) I wondered if anyone could help me on something. I have an xr3i in my off-road buggy, which is built mainly using escort/fiesta & some Anglia parts.. Key for ignition was lost and havn't been able to find a like for like ignition barrel to replace.. Tried the screwdriver method, unsuccessfully and barrel now goosed.. I have disconnected wiring from barrel but wondered if you could help me identify which wires are which.. Presume thick red is battery feed, yellow possibly starter, but not sure, and Halfords don't have a Haynes in stock !
In order to get her started.. I believe I need to bridge the power (Red) to ignition wires ? Which should give me dash light, then spark the "starter wire" onto the connected battery wire to start ? Took some pics below...
Name:  imagejpg3_zps11532f6f.jpg
Views: 40
Size:  94.3 KB
Name:  imagejpg2_zps2d834c89.jpg
Views: 41
Size:  100.9 KB
Name:  imagejpg7_zps2a53bd5e.jpg
Views: 42
Size:  116.7 KB
Any help/pointers appreciated, don't just want to experiment and end up burning out wiring.. Cheers, Kev[/QUOTE]

Last edited by Kevwana; Feb 15, 2015 at 09:05 PM. Reason: Photobucket pics not working
Reply