Thread: Goodridge hose fittings
View Single Post
Old Jan 23, 2015 | 06:38 PM
  #1  
Roscopeco's Avatar
Roscopeco
P8 Managed S1 with ALS
iTrader: (1)
 
Joined: Mar 2009
Posts: 1,746
Likes: 26
From: Up sh1t creek
Default Goodridge hose fittings
Seen these fitted to loads of cars on here so hopefully someone can help me .

I'm fitting air injectors into my S1 and I want to make braided hoses with Goodridge style fittings . As I've never fitted these before I'm unsure on the sizes fittings I need .

Can anyone tell me how to work out whether it be AN6 or AN8 etc ?


Name: 63073cdac8b4c81a8c6bec63d915ca9b_zps643aa045.jpg Views: 39 Size: 378.4 KB

I'd ideally like some 90 degree fittings to drop the hose down toward the front of the car

So I'm guessing I need to remove these fittings that are already in the injector body's and get some more ?



Is the below pic what I need to screw into the body's to replace the fittings I have and then screw a 90 degree fitting to it ?



Thanks
Last edited by Roscopeco; Jan 23, 2015 at 06:41 PM.
Reply
0