I just finished my ib5 gearbox put 2 new bearing on the rs2 LSD (only need to change one) the big one for the ib5
put the ib5 crown on it with the 8 bolts

made a 5th gear puller who worked very good



the LSD


rebuild it don't forget the 2 clips and the magnet
and put with the finger the little stick who action againste the rear gear and rebuilt the box staying in neutral...

new gasket but I rebuild the first gearboxcast with only the new gasket without using the green silicon (wich don t dry) tork the bolt at 20 Nm I hope there won t be NO leak ....grrrr

then I bought this green silicone put one it but only one the 2 last gasket



finish