Okay wires at car:

red = +
brown = earth
white=open
yellow= close

this is what i found out from old posts around the world.

I did next this.

Car + (red) to box's red (+12v) down left at picture. Car earth to black, down right at picture. I measured from the box that if i press "open" from key, blue wire will get +12V, and if i press "close" green wire will get +12V. So blue to white wires and green to yellow wires. When I closed the loop by installing the fuse, locks started immediately to turn off, on, off, on and so on.. So I tried to lock them using remote and fuse burned... HEEELP!!!