Originally Posted by
tony66
no 1 piston @ tdc assuming basic belt timing correct
rotor arm should point to no 1 on dist cap-iirc there is also a notch on dizzy body to line up rotor arm with-its marked on the timing sprocket for dizzy too
Hi there, my rotor arm does point to no 1 point but is well onto is as if it would fire too early that is why I think it is 1 or 2 teeth out. i can't tell how to accurately line the rotor arm up with the mark on the dizzy as the rotor arm is about 10mm wide. Or do I just line it up with the Middle of the arm?