View Single Post
Old Jul 27, 2014 | 09:29 AM
  #4  
Bransby's Avatar
Bransby
Part of the Furniture
 
Joined: Apr 2011
Posts: 195
Likes: 8
From: Leeds
Default

Originally Posted by tlr_rst
whats the coolant ratio like?? if its too strong antifreeze does not circulate heat well.

ford says 50/50 mix but i use a 60/40 ratio, the 60 being more water than coolant as water is a better heat transferer that coolant.

all in a watering can, top up really slowly through a funnel to avoid air leak, start engine cold (after flushing it again using my ratio if you wish) keep expansion tank cap off to let air out, feel top radiator hose open and get warm, bubbles should work way out squeezing all hose until fan kicks in thats it

also i had a dodgey fan switch when i tired to use a cozzie one, cozzie setup was not for me so i just use the standard ford fan switch again and a lower 82deg thermostat
Hi mate cheers, sounds like maybe ive a air lock then, after the work I just filled her up with just water for now, no coolant and I just filled it up cold till got to the line on header tank and run to temp wi cap off, she started to buble but never really just went down like they usually do when stat opens, I will def try your way tho cheers
Reply