Originally Posted by GINGExR2 T

.

I used to run a willwood bias on my old XR2turbo, with your master cylinder there are only 2 outlet which I believe feed opposite diagonal corners of the car.

The way I had my XR2 set up was by having the both rears running off 1 outlet so only using 3 of the 4 outlet then blocked the spare off with a bolt (flywheel bolt if I remember rightly), the XR2 has 4 not 2 like the ABS Excort master cylinder. then had the bias fitted just before a T that feed each rear corner.

You'd probably have to change yours to a non-ABS master cylinder.


Ginger

.