yes do the side screws, front and back
gently prise out window switch and disconnect plug, (could do this after handle trim)
prise out handle trim from base, flat blade screwdriver, gently wiggle the remaining part upto the switch end, revealing 2 or 3 cross head screws, undo them
handle off, now pop switch ot from underside, does less damage if ham fisted, then you have opening catch trim, open handle to get at screw, guide off that piece, theres a cover cap at front of door pocket, prise out with tiny flat blade
then your almost done, gentle tugging on sides and top panel will slacken off
then you lift panel up over the catches on lowest edge,
obviously if I`ve missed out any sighted screws remove them from the card,
don`t lose anything and you reverse the process to refit