Okay so not alot has been going on with the car over the last few months, ive been busy doing bits in the garden, putting up new fences and building a patio, all which had to be done first with the end goal of extending my single garage to a double which im currently doing so i can finish the car off in comfort. I have however made/modified this (again) as the old gauges wouldnt be up to the job of telling me what i needed to know.

Before..


One race technolody dash 2


Extended the front forwards using some 4" plastic pipe, turned down on the lathe, then cut in half to give me the curves. Built the rest up with plastic sheet which i cut out. Was going to try vacuum forming which would have been easier but had all the stuff to do it this way.