Thread: Smokestone Cosworth 4x4 to 2wd Project update 10/5/14 painted inlet
View Single Post
Old May 10, 2014 | 09:11 PM
  #105  
RSCossieGaz's Avatar
RSCossieGaz
10K+ Poster!!
iTrader: (6)
 
Joined: May 2003
Posts: 11,659
Likes: 5
From: Middlesex AKA Planet earth!!!!
Default
Not updated for awhile but progress has been abit slow of late.Visited my engine the other week as its been covered up at my old mans garage for the last 2 years just wanted to make sure it was still there lol

Name: 93F14D17-C964-4697-8BCB-C1641945246A_zpsjvaffgdx.jpg Views: 98 Size: 109.1 KB

Only thing i've done on the engine so far is remove the complete 2wd inlet as im going for a simple upgrade to a 4x4 inlet,fuel rail and regulator.

Old 2wd inlet

Name: 4854FEF3-089E-4593-9E9C-B0B50BA49439_zpsk45hr0gf.jpg Views: 118 Size: 140.0 KB
Name: E235812E-073A-4960-95CE-AD56CC6C0181_zpsa75uydq5.jpg Views: 89 Size: 166.5 KB

Etch primed the trumpets and also the 4x4 inlet cover(not pictured)
Name: 8E2DA59B-F21F-4A09-B41E-101AB46F6B6C_zps4chz04hl.jpg Views: 99 Size: 77.1 KB

Then gave both trumpet and cover a couple of coats of high temperture silver paint.

Name: BE47CAEC-4447-46FD-B920-DC90A253A4C6_zps6qccv8lw.jpg Views: 105 Size: 91.1 KB

Also picked up a polished 4x4 fuel rail and regulator and fitted 803 dark green injectors

Name: 4098DCAA-F453-4DB3-82E5-BDB7DE4F5C52_zps4yp6bhxc.jpg Views: 102 Size: 116.2 KB

All fitted together now just need to fit the throttle body
Name: DF9D7524-5628-4E03-8E8C-C7A30464C0E0_zpsgyo15yqc.jpg Views: 100 Size: 82.1 KB
Name: DC72EC6D-F97B-4C4E-AEDF-8D82A2FC5C48_zps4wweesn3.jpg Views: 116 Size: 134.6 KB
Last edited by RSCossieGaz; May 10, 2014 at 09:20 PM.
Reply
0