Hi all, havnt been on here for a while!

Wanted to ask a lil brake question if possible as my knowledge is escaping me as time goes on!

I have built a P100, 4x4 24V Bob Twin Turbo...

She's currently running 4x4 cossie spec brakes but on the stock pinto master cylinder and servo... and as im sure you can imagine the brakes are never that great.

Have been reading about and have seen that my old mate Dojj has posted on here a few times about using a 2.0 sierra with discs all round to get a good master cylinder/servo combo...

However theres something niggling in the back of my mind about using the ABS pump onto the pedal... and wiring up just the pump (no ABS wiring etc) and this gives an amazingly good pedal.

Anyone remember if this is true, or if im dreaming, or what needs to be done?

I have got a modulator i could put into the pipe system if required but technically shouldn't be needed as wont be running any ABS.

PS, im not overly interested in going to a wilwood bias box or such like at the moment.

Cheers for any replys