Originally Posted by
RichieST
You do need to add a wire into the indicator stalk. I can't remember where it goes, but on the prefacelift lights, the dipped goes out when you select main beam, which on facelift lights (seperate main and dipped) you don't really want!
It doesn't go from the headlamp switch to the indicator stalk, it is just a small piece of wires bridged across 2 pins on the indicator stalk if you get what I mean.
All it does is stops the dipped beam going out when you select main.
Pin 9 green/blue in indicator stalk plug cut off before plug as this is not needed and extend this wire over to the main light switch . Look at the multi plug at the back and join it to the smallest Green/Red wire. It should be the 3rd one in from the left as you look at it.(solder to existing wire)
Last edited by focus 4x4; Apr 27, 2014 at 11:09 AM.