I own a sierra cosworth sapphire.2wd
It has a MSD chip on standard injectors.
It runs great.
The cars spec is low compression pistons by CP.
Forged rods and arp bolts
it has the bosch fuel pump and a new regulator supplied by MSD.
OK here we go.
I fitted a T4 turbo with tubular manifold and wastegate.
I have added a set of grey injectors and 4x4 TB.
also I have a L8 ecu to fit.
it has a rs500 type inter cooler.
A 3 bar map sensor.
I am just using arp head bolts and a new 5 layer head gasket.
I have a old set of pistons for you to view with spec sheet.
I am after a MSD chip to run this.
The question is as its apart the CAMS could be done.
what ones do you suggest.
It is weekend car and is driven fast road .
After its put back together I would like to bring it to MSD for the chip to be fitted pf09 wiring done etc.
Just advice on the cams and a little return on the spec .Thank you

Any advice on the cams suitable for daily driving on a T4 with Greys and a L8 ecu it will have a custom MSD chip ?

Thankyou its in the shop now so I would like to get the cam done as well a bd12 inlet cam is the best suggestion yet wich would be good to keep the cost down.