View Single Post
Old Mar 12, 2005 | 06:47 PM
  #5  
JimRS's Avatar
JimRS
I've found that life I needed.. It's HERE!!
 
Joined: Sep 2004
Posts: 1,479
Likes: 0
From: Southampton
Default

As promised...
This morning I went to my Uncles Garage. We had it up on the ramp and had a good look and things seem a bit more positive now

The worse part which needs attention is the "Inner wings" I will be dropping this into my Uncles in a week or so. I have taken pics and will post these in the near future.

Slight work also needs to be done on the floor plan...but this is not as bad as I antisipated, I am still going to get this done though.

When I got back from my uncles garage my mates (Rob493 and his missus), Steve my temp banned from PF brother (SteveRS1980) and I stripped out the car ready for the work to be done. We removed the side skirts and bumpers, took out the carpets, interior and gash fans - who ever put that on there

I expected the worst when I took off the body kit and thought that the car would probably have rusted arches...but luck seems to now be on my side and it was all a'ok

Here are some pictures of us in action today...

Drivers side wheel arch off!


Front bumper off showing GASH fans!


Wing & Front!


James (JimRS) putting wheel back on!


Rear drivers side outta side sills!


And...again!


Rear bumper off!


Rob (Rob493) posing?


James (JimRS) turning car round to take other side sills off!


Passenger rear side wheel arch!


Striped out boot!


This is the top weld on the floor pan...well, Filler how shite!


Floor pan!


Floor pan again..!


Paula pealing Silicone off the boot!


Front of RST without fans, MUCH BETTER!


Steve's (SteveRS1980) son Harry, AKA My nephew! cleaning floor pan for me!


Harry wanted to clean and mop up the floor pan, Rather him than me it was skanky!


Rob's 4x4 Sapphire Cossie in background!


I like to play cars (in & out in & out etc...)


Still doing the Bloody wheel!



Tomorrow we are going to be removing the engine and then it will be ready to go into the garage for the work to be done...will supply with more pics...lets hope that it is a bit warmer!!!
Reply