First attempt fail!!...

90% of it was perfect, but the fly wheel side, (where there was no leak previously), was gushing out. about 3" of the half moon hadnt sealed.
Still, not bad for a first attempt.
Is there a definitive answer to get these to seal?
I used Victor Reinz one piece rubber gasket, and Loctite 5922 sealant.
Cork one next go I think.

On a stranger note, the car seems to flooding itself, and wont start when warm or hot. I know it needs resetting up, though so Im not too concerned. Never had this issue before doing sumpp gasket, which is bizarre.