Well a few things seem to be going right with the car, Had a hub problem leading to 2 new sets of bearings being bined! and a new hub, new bearings and a new drive flange all being fitted to the drivers side front! so now the brakes are fitted on the front! then I have replumbed the matrix pipework to go around the T4 and then made up new brackets for the Carbon heatsheild!! This was 3rd time lucky as each time they either hit the turbo or the airbox!! but finally I got the brackets right and the airbox and heatsheild are now fitted for good!!



I had to cut a section out of the heatsheild to allow the strut brace to fit!



I was shiittin it with the dremmel for that! found a really nice honeycomb centre though!! top stuff Marcus!! so here it is now a couple of pics!!









Just needs a right good clean now though!!!


Nick