Originally Posted by
njietro
Is it enough? It's quite an expensice try, so my choice should definetly be good enough.
Web pages says only 310nm with organic plate, and that's much less than my 400nm. I'm not sure should i try it with that AP-racing organic plate or with my 4 paddle plate.
And does it fit to IB5? Original rs turbo clutch didn't fit, the main shaft guide bushing in gearbox was too thick to pierce the clutch cover.
They underrate their clutches by a large margin, there is of course no guarantee but I've ran one very close to 300ftlb without problems.
Yes it will fit an IB5, you must use the IB5 release bearing but I've not had one too thick for the clutch cover.