Just a clue to what you'll need mate.

This is what I got,

-2.5l swirl pot/surge tank with an8 connections,
-an8 hose connectors from torques (you'll find them on ebay)
- a 50mm fuel pump clamp, braided fuel lines (make sure it is the right size hose for the an8 connectors)
-an8 blanking plug
-better fuel filter also with an8 connectors
-lots of rubber sleeved p clips for the hose
-bosch 044 pump
-torques 044 check valve
-90 degree an8 connector for the top over flow/return pipe
-grommets so the car isn't cutting through the hose and so it's water tight.
-an8 female-bosch 044 inlet connector.

Total around £500.00 but could be done cheaper if you cut out a few parts that arnt needed to for it to perform reasonably well. Do lots of research mate.