Thread: Engine question pistons rods block etc.
View Single Post
Old Mar 3, 2014 | 10:13 PM
  #5  
Turbo Zetec's Avatar
Turbo Zetec
Engine Machinist
iTrader: (1)
 
Joined: Jul 2004
Posts: 3,012
Likes: 32
From: Suffolk/Cambs
Default
7mm is way too much, the pistons are definitely not correct for that engine. They are from a BDD 1600 Atlantic! I'm not surprised it only has 70psi per cylinder.

Edited to add, Rods are from a crossflow!
Last edited by Turbo Zetec; Mar 3, 2014 at 10:17 PM.
Reply
0