To be fair it may not have even been your ECU that i saw with incorrect wiring, i remember one coming in that had pins 20 and 21 incorrectly wired, but i see probably 2 or 3 ecus a day, and non of them are labelled "from Gadget on passionford" so i sometimes struggle to work out whos is whos and which one you are talking about.

All i can say is as far as i remember, the ecu driver was refitted as it was untidy and the wiring on the hairbrush end was wrong, ( you may be able to see the solder on the pins internally, where it was connected to the wrong pin if it is the ECU im thinking of)
It did start the car i had in, but the car itself had problems, so i tried to make our sales team aware that the ecu was, as far as i could tell, working, but i would ideally like the ecu a little longer if you wanted a definate test done.
You had been calling every day so we all assumed you were in a big rush for it, so decided that you should be given the option of trying it yourself in the hope it had been fixed.
I can only appoligise if this message didnt get through to you.

All i can do is offer a further test,as it seems it does indeed start and run your car but only for a short time. i will look into the driver if needs be, we do carry most of the parts. and i have already offered this service for free.

As i said to you on the phone, it is very hard to diagnose issues once you have changed so much, doing a conversion from one car to another and end up with running issues. And you seemed happy to try and work it out with our help if needed. Again, i cant do much more as i dont have the car to test, or evaluate myself. But you can be sure we will do all we can to help.