Glad you like it

Starting to mount back the enginebay.



Engine Overhaul.
Were no cracks in the manifold and any thread that was pie in the trough so took the opportunity to do a review of the machine. Since I do if some electricity etc. so it's easier to remove it.
Around the same time so I mount the ARP bolts and ACL bearings in the bottom part. New timing belt, etc. so you know that everything is fresh.

Bolts and bearings.


Mounted




Change thread to your tension rollers if you have not done it, they give way with time!


New oil return to the crankcase breather. Moves of this to the "cold" side, this gives a more cleant space and there are no problems with the heat from the turbo / exhaust manifold.


Oilpump.