Thread: Std Fuel Lines vs Braided
View Single Post
Old Jan 28, 2014 | 03:59 PM
  #5  
Simmo's Avatar
Simmo
I've found that life I needed.. It's HERE!!
iTrader: (20)
 
Joined: Dec 2004
Posts: 1,454
Likes: 1
From: West Sussex
Default
Originally Posted by Kitchen Devil
You don't have to drill any holes anywhere

I made some little aluminium plates that fix to the original mounting points using the original self tapping screws. I then used hose separator clamp type thingys, drilled the threads out and nut and bolted it to the little plate, job done!







I used a p clip on there as well for the brake line.
Thanks, that's a great idea, I like that!

But that only works for the front 4 clips underneath, the last one before the lines step up is slotted on a little peg... what did you do there?

Also, how did you go about securing them for the remainder of the length past the beam along the chassis rail?

Originally Posted by cozzy jeff
Yeah i've seen that but the pic shows the 2wd ones which are different to Dad's old ones, despite them saying the 2wd and 4x4 are identical apparently... so wouldn't hold out much hope on them being right and the aggro involved in trying to return something so awkward to post puts me off lol
Reply
0