Make sure you run the engine in with mineral oil or runnin in oil then use fully synthetic

As per the Vulcan Engineering running in procedure;

Spin engine over with out plugs to get oil pressure

When engine started do not allow to idle, ideally should be run at 2000rpm for 10 minutes

0-500 miles max rpm 4000-4500. Change oil and filter at 500 miles and check head torgue

500-1000 miles max rpm 4500-5000

1000-1500 miles max rpm 5000-5500, change oil and filter and put fully synthetic

And they recommend not getting rolling road tuned for 3000 miles